Fluke Processmeter 789: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Fluke ProcessMeter 789 Information

The Fluke ProcessMeter 789 is a versatile instrument that combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter. It is the ultimate troubleshooting tool for electricians and instrumentation professionals.

Specifications

FeatureSpecification
DisplayLarge, dual display with two levels of backlighting
AccuracyTrue-RMS, 0.1% DC voltage, 0.05% DC current
Ranges4-20 mA, 0-10 V, 100 mV-1000 V DC, 10 mA-10 A AC
FunctionsLoop calibration, multimeter, data logging, wireless connectivity
Battery lifeUp to 80 hours
Dimensions6.7 x 3.3 x 2.2 inches
Weight14.4 ounces

Features

  • Built-in 24-Volt loop supply eliminates the need to carry a separate power supply when doing offline transmitter testing.
  • Selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.
  • Large, dual display with two levels of backlighting makes it easy to read in any lighting condition.
  • Externally accessible fuse and batteries for easy replacement.
  • Wireless connectivity with the Fluke Connect™ mobile app allows you to log data wirelessly to your smartphone and review it from a remote location.

What's in the box

  • Fluke 789 ProcessMeter
  • Carrying case
  • Instruction manual
  • 2 x AA batteries
  • Fuse
  • HART® resistor

Applications

The Fluke ProcessMeter 789 is a versatile instrument that can be used for a wide variety of applications, including:

  • Troubleshooting electrical and instrumentation systems
  • Calibrating transmitters
  • Testing sensors
  • Measuring current, voltage, and resistance
  • Logging data

Conclusion

The Fluke ProcessMeter 789 is a powerful and versatile instrument that is ideal for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter. The 789 is also equipped with a number of advanced features, such as a built-in 24-Volt loop supply, a selectable 250-ohm HART® resistor, and wireless connectivity with the Fluke Connect™ mobile app. If you are looking for a powerful and versatile instrument to help you troubleshoot electrical and instrumentation systems, the Fluke ProcessMeter 789 is a great option.

Fluke ProcessMeter 789 Compare with Similar Item

a table comparing the Fluke ProcessMeter 789 with similar items:

FeatureFluke ProcessMeter 789Fluke 787BKeysight 34461A
Measurement capabilitiesAC/DC volts, AC/DC current, resistance, continuity, frequency, 4-20 mA current, mA source/simulate, 24 V loop power supplyAC/DC volts, AC/DC current, resistance, continuity, frequency, 4-20 mA currentAC/DC volts, AC/DC current, resistance, continuity, frequency, 4-20 mA current
Accuracy+/-0.01% + 1 count+/-0.05% + 2 digits+/-0.05% + 2 digits
DisplayMultiline LCDMultiline LCDMultiline LCD
Safety ratingCAT III 1000V, CAT IV 600VCAT III 1000V, CAT IV 600VCAT IV 600V
Dimensions9 x 2 x 2 inches9 x 2 x 2 inches9 x 2 x 2 inches
Weight0.61 kilograms0.61 kilograms0.61 kilograms
Price$1322.99$1199.99$1299.00

Additional features of the Fluke ProcessMeter 789:

  • Simultaneous mA and % scale readout
  • Built-in 24 V loop power supply
  • USB connectivity for data logging and analysis
  • Fluke Connect compatibility for remote monitoring and control

Additional features of the Fluke 787B:

  • True RMS measurements
  • Backlit display
  • Audible continuity tone

Additional features of the Keysight 34461A:

  • High-resolution display
  • Programmable functions
  • Storage for up to 1000 measurements

Conclusion:

The Fluke ProcessMeter 789 is a versatile tool that offers a wide range of measurement capabilities. It is a good choice for technicians who need to troubleshoot and calibrate 4-20 mA control loops. The Fluke 787B is a more basic tool, but it offers true RMS measurements and a backlit display. The Keysight 34461A is a high-end tool that offers a variety of programmable functions and storage for up to 1000 measurements.

The best tool for you will depend on your specific needs and budget.

Fluke ProcessMeter 789 Where To Buy

You can buy the Fluke ProcessMeter 789 and spare parts from the following retailers:

  • Fluke Direct: This is the official website of Fluke, so you can be sure that you are getting the genuine product. They also offer a variety of spare parts for the 789.
  • Walmart: Walmart is a large retailer that often has competitive prices on the 789. They also offer free shipping on orders over $35.
  • Amazon: Amazon is another large retailer that often has good prices on the 789. They also offer a variety of spare parts and accessories for the meter.
  • Best Buy: Best Buy is a electronics retailer that often has the 789 in stock. They also offer a variety of financing options.
  • Lowes: Lowe's is a home improvement retailer that sometimes carries the 789. They also offer a 1-year satisfaction guarantee on the meter.
  • eBay: eBay is a marketplace where you can often find used or refurbished 789s at a discounted price. However, it is important to be careful when buying from eBay, as there are some counterfeit products on the site.

I hope this helps!

Fluke ProcessMeter 789 Problems and Solutions

some common issues and solutions for the Fluke ProcessMeter 789, as reported by experts:

Issue: The meter won't power on.

Solution:

  1. Check the power cord to make sure it is plugged in properly.
  2. Make sure the batteries are installed correctly.
  3. If the meter is still not powering on, try resetting it by holding down the Mode button for 10 seconds.

Issue: The LCD display is faded or has missing segments.

Solution:

  1. Check the contrast setting to make sure it is set to a high enough level.
  2. If the contrast setting is already high, the LCD display may be failing. In this case, you will need to replace the LCD display.

Issue: The meter is not measuring or reading volts, amps, or ohms accurately.

Solution:

  1. Check the input connections to make sure they are secure.
  2. Make sure the correct measurement range is selected.
  3. If the meter is still not measuring accurately, you may need to calibrate it.

Issue: The keypad buttons don't work.

Solution:

  1. Check the keypad to make sure it is clean and free of debris.
  2. If the keypad is clean, the buttons may be failing. In this case, you will need to replace the keypad.

Issue: The meter won't source or output mA loop current.

Solution:

  1. Check the mA loop current settings to make sure they are correct.
  2. If the mA loop current settings are correct, the mA loop output circuit may be failing. In this case, you will need to replace the mA loop output circuit.

Issue: The LCD display or case is cracked or broken.

Solution:

  1. If the LCD display is cracked or broken, you will need to replace the LCD display.
  2. If the case is cracked or broken, you may be able to repair it with a kit. If the damage is too severe, you will need to replace the case.

Typical Repair Cost Range: $250 - $375

How to Request Repair:

  1. Fill out the repair form below.
  2. Ship the unit to us using your choice of carrier.
  3. We will diagnose the problem and send you a formal quote for repair.

Repair Request Form: [Link to repair request form]

I hope this helps!

Fluke ProcessMeter 789 Manual

Safety Information

  • Read and understand all safety warnings and instructions before using the Fluke 789 ProcessMeter.
  • Do not use the meter in an explosive atmosphere.
  • Do not use the meter near water or other liquids.
  • Do not use the meter if it is damaged.
  • Do not use the meter if the battery compartment cover is loose or missing.
  • Do not use the meter if the fuse is blown.
  • Do not use the meter if the display is cracked or unreadable.
  • Do not use the meter if the buttons are stuck or do not work properly.
  • Do not use the meter if the case is cracked or damaged.

Before Use

  • Before using the meter, inspect the case for damage.
  • Make sure that the fuse is not blown.
  • Install new batteries if the batteries are low.
  • Set the meter to the correct range for the measurement you are making.
  • Make sure that the meter is properly grounded.

Troubleshooting

If you are having problems with the meter, try the following troubleshooting steps:

  • Make sure that the meter is properly connected to the equipment you are testing.
  • Make sure that the meter is set to the correct range.
  • Make sure that the batteries are not low.
  • If the problem persists, contact Fluke Technical Support.

Maintenance

  • Keep the meter clean and dry.
  • Do not use harsh chemicals or solvents to clean the meter.
  • If the meter gets wet, dry it immediately with a soft cloth.
  • Replace the batteries every 12 months, or sooner if the display starts to dim.
  • Do not attempt to disassemble the meter.

Warranty

The Fluke 789 ProcessMeter is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the meter fails during the warranty period, it will be repaired or replaced at no charge.

Contact Information

For more information about the Fluke 789 ProcessMeter, or to contact Fluke Technical Support, please visit the following website:

Additional Information

  • The Fluke 789 ProcessMeter can be used to measure a variety of electrical parameters, including voltage, current, resistance, frequency, and power.
  • The meter can also be used to source current, simulate 4-20 mA signals, and provide loop power.
  • The Fluke 789 ProcessMeter is a CAT III 1000 V, CAT IV 600 V safety rated meter.
  • The meter comes with a carrying case, two batteries, and a user manual.

I hope this manual has been helpful. Please contact Fluke Technical Support if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Abb 7b662: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
ABB 7B662 Information The ABB 7B662 is a 115V, 60Hz, 3.1A, 3600 RPM dry grinder with two 152mm grinding wheels. It is a versatile tool that can be used for a variety of tasks, including: Sharpening tools Removing rust Polishing metal Engraving Cutting gaskets Deburring The 7B662 features a durable construction with a metal housing and rubber feet to prevent it from slipping. It also has a spark protection shield to prevent sparks from flying while you are working. The grinder is easy to use with a simple on/off switch and a variable speed control knob. Here is a table of the full specifications of the ABB 7B662:
Read more

The Complete Guide To Voltcraft Vc-740 E: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Image
Voltcraft VC-740 E Information The Voltcraft VC-740 E is a digital clamp meter that can measure AC and DC current, voltage, resistance, capacitance, and frequency. It also has a diode test function and a continuity checker. The VC-740 E is rated CAT IV 600 V, making it safe to use on live circuits up to 600 volts. It is also dust- and spray-proof (IP54), making it suitable for use in harsh environments. Specifications
Read more

Husqvarna T425: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Husqvarna T425 Information the information about the Husqvarna T425 chainsaw: Introduction The Husqvarna T425 is a lightweight and compact chainsaw designed for professional tree care and pruning applications. It features a powerful 25.4cc two-stroke engine that delivers up to 0.96 kW of power, making it easy to handle even large branches. The T425 also comes with a number of features that make it a safe and user-friendly chainsaw, including a low-vibration design, inertia-activated chain brake, and adjustable oil pump.
Read more